# Colin Foster's Mathematics Education Blog

## 27 October 2022

Sometimes a superficially small tweak to a task - changing just one little thing - can dramatically alter it, and mean that a lot more thinking - or very different thinking - is needed. In many cases, students don't need to be taught any additional facts or methods beyond what they have already learned - they know everything necessary to be able to figure out what difference the change makes.

The details matter in mathematics task design and adaptation. Here are just a few examples of small ways in which tasks can be adapted to make them more challenging and so that they may provoke deeper thought. For more on ways to adapt mathematics tasks, see Prestage and Perks (2013). The tasks below all take the form "You know this, but what about this?"

#### 1. Change the base

It's sometimes said that You don't understand long division until you can do it in any base.

You know how to work out $252 \div 6$ in base $10$, but can you do it in base $16$?

In which other bases does $252 \div 6$ give an integer answer? Why?

Doing arithmetic in different bases used to be much more common in UK mathematics teaching, and it is still quite prevalent in schools in many countries. I find that people often assume that it's much more complicated than it is. I once heard a staffroom conversation that went something like this:

A: I think we're just too obsessed with base 10 and we don't take opportunities to work in other bases.
B: Yes, I guess it's just a convenience thing - it's so handy, for example, to be able to multiply by 10 by just placing a zero on the end.
A: Do you know how to multiply by 7 in base 7?
B: Er, no, not off the top of my head, but I should think it's very complicated. That's my point about why we always resort to base 10.

Exploring factors of numbers in different bases can be a good way to see why person B is wrong about this!

You know the factors of $12$ in base $10$, but what are the factors of $12$ in base $16$?

In which bases is $12$ prime? Why?

By changing something, away from the familiarity of base 10, we can 'make the familiar strange' and see things in new ways. It is such an apparently small change, but there are many tasks in which a change of base can be insightful (see Foster, 2007). For example,

You know that, in base 10, $\frac{1}{2}$ is a terminating decimal and $\frac{1}{3}$ is a recurring decimal. Which fractions terminate and recur in other bases? Is there a base in which $\frac{1}{2}$ is a recurring decimal and $\frac{1}{3}$ is a terminating decimal? Or in which they are both recurring or both terminating? What is $\frac{1}{2}$ in base 16? What about in base 15? What about in other bases?

#### 2. Introduce modulus signs

The definition of the modulus function is very simple. You could use the ideas below when teaching students about the modulus function for the first time. But you could also use them with any students - even quite young ones - who don’t ‘need’ to learn about the modulus function. You would be using the modulus function as a way to get them to think more deeply about things they do 'need' to think about.

The modulus function $\lvert x \rvert$ is defined as:

$$\lvert x \rvert=\left\{ \begin{array}{@{}ll@{}} x, & \text{if}\ x \ge 0 \\ -x, & \text{if}\ x \lt 0 \\ \end{array}\right.$$

But the idea is much simpler and more accessible than this formal notation might suggest. The value of $\lvert x \rvert$ is the absolute 'size' of $x$, regardless of its sign. So $\lvert 18 \rvert = 18$, but $\lvert -18 \rvert = 18$ also. This means that $\lvert x \rvert$ is never negative (Note 1).

That is all the formal teaching that is needed. The task is then is to try some things that students can already do, but with a modulus function thrown into the mix - a superficially small change, but with a 'butterfly' effect.

You know what the graph of $y=\sin x$ looks like. What about $y=\lvert \sin x\rvert$? Or $y=\sin \lvert x \rvert$?

You know what the graph of $y=x+1$ looks like. What about $y=\lvert x \rvert+1$ or $y=\lvert x+1 \rvert$?

You know what the graph of $y=(x+1)^2$ looks like. What about $y=\lvert x+1 \rvert^2$? Or $y=( \lvert x \rvert + 1)^2$?

You know how to solve $3x-2=10$. What about $\lvert 3x-2 \rvert =10$?

You know how to solve $3x-2=2x+1$. What about $\lvert 3x-2 \rvert = \lvert 2x-1 \rvert$?

You know how to solve $3x-2<2x+1$. What about $\lvert 3x-2 \rvert < \lvert 2x-1 \rvert$?

You know how to find the integral $\int (x^2-1) dx$. What about $\int \lvert x^2-1 \rvert dx$?

Introducing modulus signs is a little like introducing $\pm$ signs (see Foster, 2012) in that you are making a superficially small change that has the effect of requiring students to think quite hard.

Finally, for modulus functions, take a look at this graph:

What combination of modulus functions could produce this graph? (See Note 2 for the answer.)

#### 3. Go non-linear

Older students may know, or have a sense of, what happens if you change a function $f(x)$ into, say, $f(-x)$, or $f(mx)$, where $m$ is a constant. But what happens to well known graphs of $y=f(x)$ if we change:

• $x \mapsto \frac{1}{x}$; e.g., $\sin {(\frac{1}{x})}$, $e^{\frac{1}{x}}$?
• $x \mapsto x^2$; e.g., $\sin {x^2}$, $e^{x^2}$?
This is something that older students may find interesting to explore. It is worth delaying going to graph-drawing software until after you have thought hard about it, and have definite conjectures to check out. Turning to graph-drawing software too soon risks circumventing the thinking, rather than supporting it.

#### 4. Look for in-between values and concepts

You probably know what the graph of $y=x^n$ looks like for positive integer $n$ and for $n=-1$. But what about for other negative integer $n$? And what about for non-integer $n$, both positive and negative (Note 2)?

You probably know about 'highest common factors' (or 'greatest common divisors'). What about 'second-highest common factors'? When do/don't they exist? What can you work out about them?

You probably know about 'common multiples' as the numbers where sequences like $3n$ and $8n$ intersect. But where do sequences like $3n+1$ and $8n-2$ intersect?

You probably know how to construct a perpendicular bisector? How would you construct a perpendicular trisector?

#### Conclusion

Variation theory currently receives a lot of attention, and can be powerful for helping students attend to what is the same and what is different in a sequence of tasks. In this spirit, little changes beyond what students need to know, and into unknown terrain, can be interesting extension tasks and valuable tasks for everyone to deepen their knowledge and understanding.

### Questions to reflect on

1. What other butterfly examples do you have, where 'changing one little thing' has a big effect?

2. When would you use tasks like this?

### Notes

1. Of course, the notation $\lvert x \rvert$ is also used where $x$ (perhaps written as $\textbf{x}$) is a vector, or where $x$ is a complex number, or to indicate the determinant of a matrix (in which case $\lvert x \rvert$ could be negative). But in this post I am only thinking about $x$ as a real number ($x \in \mathbb{R}$).

2. The graph is $y= \lvert x-2 \rvert + \lvert x+2 \rvert - \lvert x-1 \rvert$. Students could invent tasks like this for each other.

3. If you use software to draw $y = x^n$, and set up a slider to vary the value of $n$, you may notice a 'flickering' behaviour for negative values of $x$. It is interesting to think about why this happens. If $n$ is rational and equal to $\frac{p}{q}$, where $p$ and $q$ are integers, $q \neq 0$, and $\frac{p}{q}$ is in its lowest terms, then the domain of $x$ is:

• all of the real numbers, if $q$ is odd, but
• all of the non-negative real numbers, if $q$ is even.

This means that, when $n$ is real, but not rational, the domain is all the non-negative real numbers. So, the graph flickers as you drag the slider because, as $n$ varies, the function keeps switching between being defined and undefined (see also Dobbs, 2017).

### References

Dobbs, D. E. (2017). Why the $n$th-root function is not a rational function. International Journal of Mathematical Education in Science and Technology, 48(7), 1120-1132. https://doi.org/10.1080/0020739X.2017.1319980 (\) Foster, C. (2007). Twenty–one forever! Journal of Recreational Mathematics, 36(3), 194–195. https://www.foster77.co.uk/Foster,%20Journal%20of%20Recreational%20Mathematics,%20Twenty-One%20Forever.pdf Foster, C. (2012). Plus–minus graphs. Mathematics in School, 41(2), 32–33. https://www.foster77.co.uk/Foster,%20Mathematics%20in%20School,%20Plus-Minus%20Graphs.pdf Prestage, S., & Perks, P. (2013). Adapting and extending secondary mathematics activities: New tasks for old. David Fulton Publishers. ## 13 October 2022 ### How open should a question be? People often say or imply that when teaching mathematics 'open questions' are simply better than 'closed questions'. Instead of asking students a closed question like “What is 3 \times 4?”, which has only one right answer, it is supposed to be better to ask them to “Tell me some products that make 12”, because this more open question has multiple possible correct answers. The more possible correct answers there are, the more ways there are for students to be right, and that feels more positive and inclusive. Open questions promote students’ creativity and individuality. But is it as simple as 'the more open the better'? Should we be sorry whenever we use a closed question? Any question can always be made more open, but is that always an improvement? In the “Tell me some products that make 12” question above, why specify ‘products’? Instead, we could say “Tell me some calculations that make 12”, and that would be even more open. Or we could go even further and say “The answer is 12, what could the question be?” (see Ball & Ball, 2011, p. 20, for the '42' version of this). Perhaps the ultimate open question would be something like “Make up a question and an answer of your own choosing.” Is that the best possible question of all? It seems to me that these questions can’t simply be getting better and better the more open we make them. Whether these questions are good or bad must surely depend on the teacher’s purposes in asking them. Let’s think about these questions in turn and how they might be more or less useful for different purposes. #### 1. Tell me some products that make 12. This could be a nice way to start thinking about factor pairs. One student says “3 \times 4”; another says “6 \times 2”. Perhaps, after a slightly longer pause, another student says “1 \times 12”. Now what do you do? If you continue to wait, then, after perhaps an even longer pause, you may be offered things like “4 \times 3” or “24 \times \frac{1}{2}” or even “(-6) \times (-2)” or perhaps (possibly?) “n \times \frac{12}{n}”. Is any of that helpful? I think it depends on your didactical purposes. Answers like these could lead to drawing rectangles of equal area (12) but different semi-perimeters, and explorations into equable rectangles (see Foster, 2021), and perhaps even aligning all these rectangles on a grid, with a common vertex at (0, 0), to create points at the diagonally-opposite vertex that lie on the curve y=\frac{12}{x}. But, if you are defining factors as positive integers (so 3 is a factor of 12, but \frac{2}{3} isn't), then most of these pairs are going to end up being non-examples of that, and we have drifted from the original purpose of thinking about factor pairs. Non-examples can be really important for nailing down what something is, but if you want to think about factors then we need to be working on the positive integers. So, although opening things up can feel accepting and positive, it can also be confusing for students and distracting from your intentions. If you want to focus on factors, maybe there is nothing wrong with being upfront about this, and saying what you mean by ‘factor’. Then you can ask, “Tell me a factor of 12”, and then ask for another one, and another one, and you still have multiple possible right answers - but this time there is a finite number of them. This means that, additionally, you can work on trying to justify how we can be sure that we’ve got them all. Being less inclusive about possible allowed numbers shuts down some possibilities (we can no longer have -6 or \frac{1}{2}) but opens up others: Now we can ask "Could there be any more? How can you be sure?" So, 'less open' doesn't necessarily mean fewer possibilities - it's just different. #### 2. Tell me some calculations that make 12. With this question, asking for ‘calculations’ enormously broadens out the possibilities that students could offer. Is that a good thing or a bad thing? If your learners are lower primary, they might be highly likely to offer additions and subtractions, and this could be a useful way in to number bonds to 12. Even with secondary-age students, simple responses like 10 + 2 could lead you to explore the partitions of 12; i.e., How many ways are there of making 12 from summing positive integers? There are lots of interesting things to explore here. The total of 12 can be made by summing pairs of positive integers in 6 ways (1+11, 2+10, 3+9, 4+8, 5+7 and 6+6) and by summing three positive integers at a time in 12 ways (1+1+10, 1+2+9, ...). But how does this pattern continue - and what happens with other numbers than 12? (See Foster, 2011, pp. 110-112, for the details.) But, if this is where you want to be heading, it might be preferable to ask a more closed question like "How can you express 12 as a sum of positive integers?" Otherwise, you might end up with things like \frac{120}{10} or 2 \times 2 \times 3 or 1+2 \times 4 + 3 or \sqrt{144}, which could take you in all sorts of other directions (e.g., decimals, fractions, prime factorisation, priority of operations, powers). I have often seen teachers ask very open questions, even though they have something quite specific in mind. Whatever the students respond with, they praise it and write it up on the board - but actions speak louder than the board pen, and the students are watching to see what the teacher is eventually going to do. No matter how much the teacher says, "These are all great ideas ...", the students know that they should ignore everything before the 'but', and so "... but today we're going to focus on..." is the point at which the teacher appears to come clean about what they really wanted right from the beginning. The person who said 10 + 2 was 'right' and everyone else was 'nice try'. So, I'm not convinced that open questions that lead to lots of possibilities are really all that inclusive if the teacher's response to all of the ideas except one is just to write it on the board and ignore it. But what is the alternative if you are using hyper-open questions? Allowing different students to work on totally different '12'-related problems splits the class into groups doing mathematics that may be as unrelated to each other as it is to the work being done by the students in the classroom down the corridor. And it can be hard to ensure that everyone has a suitably accessible and worthwhile challenge that will lead to learning something useful. The possibilities for sharing and building on each other's contributions later are quite limited if all that the different tasks have in common is that they have something to do with the number 12. So, for me, prompt #2, although undeniably more 'open' than prompt #1, is more likely to close down the possibilities for purposeful sense-making of mathematics. Whereas adding constraints to #2, such as "It must include a cube root", or, for sixth formers, "It must include a logarithm", or "It must include an imaginary number", might make this more interesting and purposeful, depending on the teacher's intentions. Provided that there aren't too many, constraints often lead to creativity, whereas total freedom may not inspire anything. #### 3. The answer is 12, what could the question be? Now we have broadened out beyond even ‘calculations’. Students might say “What is the order of rotational symmetry of a dodecagon?” or “What is the maximum total you can get with two ordinary dice?” or “How many millimetres are there in 1.2 cm?” This might feel like a nice creative task for getting students to reflect on different ways in which 12 can appear in mathematics, but you could end up with quite a few less-mathematical responses, or low-level mathematical responses, like “What number bus goes to the sports centre?” or “How old is Amit’s sister?” or "What are the last two digits of the school phone number?" or "How many days of Christmas are there in the song?" (see https://en.wikipedia.org/wiki/12_(number) for all things 'twelve'). By the time we reach a question as open as #3, we have really abdicated all responsibility for setting the direction of travel of the lesson, and ‘anything goes’ now. I guess I could maybe imagine asking this question as a lesson 'filler', or as a revision task: "Make up a question on each topic we've studied this term - and make all the answers '12'." But I don't think I could use this task to introduce anything new or focused on any particular content area, as it is too hard to predict what might happen with it. But maybe others are more expert at doing this than I am? #### More 'mathematical' can mean more closed Tony Gardiner (n.d., p. 31) has written that ‘While there are exceptions, it is generally true to say that good problems in school mathematics are almost never open-ended!" He advocates open-middled problems, where there is a closed start and end but multiple possible routes through. I think that teachers worry about using closed questions because they think they are too straightforward. But it is a big mistake to think that closed questions are likely to be simple or trivial. Most of the famous hard unsolved problems in mathematics are closed - even binary yes/no (e.g., Is the Riemann hypothesis true?) (see Foster, 2015). Often we can make an open question more challenging by closing it, and that's usually a highly mathematical thing to do. The question we considered above, "Tell me a factor of 12", is open, but this should naturally lead to the desire to find them all by closing the question to: "What are the factors of 12?" This is now closed, because there is only one right answer (i.e., 1, 2, 3, 4, 6, 12). In a sense, giving just 5 of these is not \frac{5}{6} correct, but wrong. This is not 'multiple answers' any more, because the question asks for all of them. It is as closed as the question "How many factors does 12 have?" (Answer: 6). Similarly, the closed question "Solve x^2=9" has one right answer, consisting of the two solutions x=-3 or 3, whereas the open question "Find any solution to x^2=9" has two possible right answers, x=-3 or x=3. This may seem like splitting hairs, but the closed question is far more powerful - and mathematical - because we not only find all of the solutions but we know that there can't be any more, so we are finished and have complete knowledge of the situation (see Foster, 2022). Thinking in this way, many of the open questions used in school can be viewed as merely poorly-specified or incomplete closed questions. As an example, consider the question: "I'm thinking of two numbers. Their sum is 12. What are the numbers?" We could respond "Impossible - insufficient information!", or we could give a few example pairs (which are effectively of the form "If one number is this, then the other number would be that"). Or we could plot all possible example pairs on the line x+y=12, which feels like as complete an answer as is possible. But is it that the question is open or merely that the (single) answer to this closed question happens to be an infinite solution set? (Note 1) A more clear-cut example might be: "A number rounded to 1 decimal place is 3.1. What might the number have been?" This is open, and, again, in this case, there are infinitely many possible answers. The corresponding closed question would be "Which numbers round to 3.1 to 1 decimal place?", and here the answer would be all x in the interval 3.05 \le x < 3.15. There's a sense in which this is 'the complete answer'. But, I think it doesn't quite capture everything that might emerge from the open question. For example, someone might respond to the open version by saying \pi, and, although that is of course included in the range specified in the closed version, I might not have explicitly considered \pi (or even the possibility of any irrational numbers) when writing down the 'complete' answer. The double inequality expresses the whole range of possibilities without necessarily examining it in detail. To me there is certainly an important difference between a closed question like "Which numbers round to 3.1 to 1 decimal place?" and a closed question like "What is 3.08 rounded to 1 decimal place?", but the difference isn't about open/closed, as, for me, both are equally closed. The difference here is that the first question is an inverse question, and inverse questions are always harder and more interesting than direct questions (e.g., factorising versus multiplying, square rooting versus squaring, integrating versus differentiating). Open questions are often essentially 'Give me an example of...', example-generation questions (see Watson & Mason, 2006), and I think these are extremely valuable when used to complement closed 'Characterise all the possibilities' kinds of questions. We need both. But making open questions more closed can be just as valuable mathematically and didactically as making closed questions more open. ### Questions to reflect on 1. What do you think about the value of 'open' questions? When do you use them or avoid them? Why? 2. When is it good to be more open? When is it good to be more closed? ### Note 1. I guess one way to treat this as open would be to offer multiple ways of specifying the solution set (e.g., 2x+2y=24, y=12-x, x+y-12=0, y=-x+12, \frac{x+y}{2}=6, etc.) ### References Ball, B. & Ball, D. (2011). Rich task maths 1. Association of Teachers of Mathematics. Foster, C. (2011). Resources for teaching mathematics 11–14. London: Continuum. Foster, C. (2015). Fitting shapes inside shapes: Closed but provocative questions. Mathematics in School, 44(2), 12–14. https://www.foster77.co.uk/Foster,%20Mathematics%20In%20School,%20Fitting%20shapes%20inside%20shapes.pdf Foster, C. (2021). Area and perimeter. Teach Secondary, 10(6), 13. https://www.foster77.co.uk/Foster,%20Teach%20Secondary,%20Area%20and%20perimeter.pdf Foster, C. (2022). Starting with completing the square. Mathematics in School. Gardiner, T. (n.d.). Beyond the soup kitchen: Thoughts on revising the Mathematics “Strategies/Frameworks” for England. https://www.cimt.org.uk/journal/gardiner.pdf Watson, A., & Mason, J. (2006). Mathematics as a constructive activity: Learners generating examples. Routledge. ## 29 September 2022 ### Tasks that can't fail Do you have tasks that you use in lessons that "can't fail"? Favourite tasks that you've used many times and that always seem to go well? What features of these tasks seem to make this happen? When mentoring trainee teachers in school, I found that it could be useful to have tasks to share with them to try out as some of their first experiences working with students (Foster, 2021). I think there's a place for tasks which "always seem to go well" and never seem to fail. Of course, we should 'never say never'. But rather than asking the trainee teacher to teach whatever happens to come next in the scheme of learning, for their first experiences I would usually give them something which requires minimal introduction and explanation and which students are likely to engage in with some enthusiasm, and will lead to productive conversations and the potential for a nice whole-class discussion. (These kinds of tasks can also be useful for 'interview lessons', when going for a job in another school.) Sometimes trainee teachers, as one of their first experiences, are asked to do "the last 10 minutes" of a lesson. But I think this is very difficult. Even with lots of experience, it can be hard to gauge how long something will last, and the skill of drawing things out or speeding them up is really hard. Games like mathematical bingo are particularly difficult for lesson endings, I find, because it's hard to predict when someone will win and the game will finish, and if there's just 1 minute of the lesson left is there time to play another round? Also, students may be tired and not always at their best at the end of a lesson - especially if the lesson is followed by break or lunch or home, or if something fractious happened during the lesson. And the trainee teacher can be in the undesirable position of starting something off that goes well and then having to stop everyone part way through so as not to crash through the bell. So, I prefer to ask the beginning trainee teacher to do the beginning of a lesson, and take as long or as short a time as they wish - and then I will pick up from wherever they leave off. If their section ends up taking 5 minutes, that's fine. If it ends up taking 20 minutes, that's also fine. Obviously, timekeeping is an important part of teaching, but I think it's helpful to focus on one thing at a time, so I try to remove time pressure in the first early experiences, so that the teacher can focus on what they are doing and what the students are doing, and experience the freedom of 'going with something' that takes off. So I want to take some things away, that they don't need to worry about until later. Above all, I want the teacher's first experience teaching a class to be a positive one that doesn't put them off. I want them to feel that teaching is something they can enjoy and that they want to do and can get better at doing. So, what kinds of tasks can be effective for this? Over the years, I've developed a list of "can't fail" tasks for these kinds of purposes. Here are two: #### 1. Four fours I probably don't need to say much about this task, as it is such a classic: What numbers can you make from four 4s? (For more details, see Foster, 2020.) Sometimes teachers use this task in order to work on specific topics, such as priority of operations, but it can also be a great task for general numeracy and developing careful, systematic thinking. I think 'Four fours' can work with pretty much any age/stage of class. It requires very little set-up at the start and it is easy to get students sharing what they've come up with. I've used it with all ages in school and also with teachers. #### 2. Possibility tables Collaborative 'group work' is often perceived as an extremely difficult thing to do well, and perhaps something for trainee teachers to delay attempting until they have more experience (Foster, 2022). I think this is not necessarily the case, and pairwork, in particular, can be highly effective in situations in which the students have a clear joint task, which they both need to contribute to. One way to encourage this is through the resources that you provide. I remember one day realising in a flash of insight - as though it were a huge revelation - that the photocopying cost of one A3 piece of paper is (about) the same as that of two A4 pieces of paper. So, for the same cost, I could give every pair of students one A3 sheet, rather than give every student one A4 sheet. One A3 sheet and one pencil between two students can, if the task is well designed, almost 'force' effective pair work. One "can't fail" task that seems to do this is what I call Possibility tables (Foster, 2015). These are a bit like what John Mason calls structured variation grids (see http://mcs.open.ac.uk/jhm3/SVGrids/SVGridsMainPage.html#What_is_an_SVGrid). For example, the possibility table below (pdf version) varies order of rotational symmetry across the top and the number of lines of symmetry down the side. The task is for students to write the name, or draw a sketch, of any figure that could go in each cell of the table. If a cell is impossible to fill, they should indicate so, and try to explain why. (The notion that some combinations may be impossible is 'on the table' from the start.) Again, with a task like this, there is very little set-up at the start from the teacher. A quick check or reminder about the definitions of 'order of rotational symmetry' and 'line of symmetry' is all that is required, and, if some students are still a little unsure of these, they will have ample opportunity to clarify that through the task. The dynamic of one large sheet of paper and one shared pencil (pencil is preferable to pen, because then ideas are easily erased and replaced) seems to 'force' discussion. (A separate blank sheet of rough paper may also be useful, for trying out ideas.) If both students have a pencil, they can end up working relatively independently at opposite ends of the sheet, which is probably not what I would desire, whereas one shared pencil seems to lead to conversations about what is possible and what should be put where. But if students are very proficient at collaborative work then a pencil each might be OK (as in the drawing below). Often a 'wrong' figure can be viewed as 'right; just in the wrong place', and we can just move it to a different cell, and this sometimes means that we end up with multiple figures in some cells, which is fine. We can ask: Why do some cells seem to be easier to find figures for than others? You could say 'shape' instead of 'figure'. If students can't think of 'mathematical' shapes to try, you could suggest capital letters of the alphabet. One strategy is to work through the cells systematically, trying to think of shapes that would fit. Another is to first think of shapes and then decide where they go. I find that lots tends to emerge from this task. Like 'Four fours', I've used it with students from primary age up to sixth form, and with trainee and experienced teachers as participants. It is possible to use university-level mathematics to reason about which symmetry combinations are definitely impossible. And there are many other pairs of variables that can generate other possibility tables. These are two tasks I would generally be confident to give to a beginning teacher in the expectation that they would be likely to have a positive experience. ### Questions to reflect on 1. What do you make of these tasks? 2. What "can't fail" tasks do you use? ### References Foster, C. (2015). Symmetry combinations. Teach Secondary, 4(7), 43–45. https://www.foster77.co.uk/Foster,%20Teach%20Secondary,%20Symmetry%20Combinations.pdf Foster, C. (2020). Revisiting 'Four 4s'. Mathematics in School, 49(3), 22–23. https://www.foster77.co.uk/Foster,%20Mathematics%20in%20School,%20Revisiting%20Four%204s.pdf Foster, C. (2021). First things first. Teach Secondary, 10(6), 82–83. https://www.foster77.co.uk/Foster,%20Teach%20Secondary,%20First%20things%20first.pdf Foster, C. (2022). The trouble with groupwork. Teach Secondary, 11(5), 70–71. https://www.foster77.co.uk/Foster,%20Teach%20Secondary,%20The%20trouble%20with%20groupwork.pdf ## 15 September 2022 ### Always simplify your answer Einstein is supposed to have said that “Everything should be made as simple as possible, but no simpler”. Mathematics questions often say 'Simplify your answer', or, if not explicitly stated, then this is often assumed, but is it a 'simple' matter to say what 'Simplify' actually means? A student was calculating the radius of a circle with unit area. They wrote\pi r^2=1r^2=\frac{1}{\pi}r=\frac{1}{\sqrt{\pi}}r=\frac{\sqrt{\pi}}{\pi}$$When challenged about the final step, they said that they were 'rationalising the denominator'. The teacher said, "You mean 'irrationalising' the denominator?", since \pi is irrational. But the attempt at humour was not really right, because the denominator was irrational before and after this step. However, I have some sympathy with what the student was doing, presumably by analogy with things like$$\frac{1}{\sqrt{3}}=\frac{\sqrt{3}}{3}.Dividing by a rational number, like 3, is much 'nicer' than dividing by an irrational number, like \sqrt{3}, and so rationalising denominators feels like a good thing to do, and comes under the heading of 'simplifying your answer'. But with \sqrt{\pi}, of course, that is different, because 3 is rational, whereas \pi is not. But \pi is typographically almost a numeral, and we may sometimes think of it in that way, and, in cases like this, the fact that \pi happens to be irrational feels separate from the square-rooting issue. Somehow, \frac{\sqrt{\pi}}{\pi} does kind of look nicer than \frac{1}{\sqrt{\pi}}; perhaps \sqrt{\pi} seems even more irrational than \pi? In fact, although it is irrational, we tend to think of \pi as a beautiful, elegant number, whereas a decimal approximation, like 3.14, although rational, does not seem anywhere near so nice. And I suppose \sqrt{\pi} seems uglier than \pi, although \sqrt{\pi} does turn up in some interesting places (e.g., the Gaussian distribution). This got me thinking about how confusing it can be for students to appreciate what counts as 'simplified', and there is some mathematical aesthetics here along with some perhaps rather arbitrary inconsistencies. Students may first meet the idea that there are multiple ways of representing the same thing when they encounter equivalent fractions. There, writing a fraction in its 'simplest form', or 'lowest terms', means reducing it to the smallest possible integers. There is something intuitive about 'simple' and 'small integers' being the same thing. But things soon become more complicated (see Foster, 2021). Everyone would agree that 2x is simpler than 3x-8x+7x, say, but is 2(x+1) simpler than 2x+2? Simplifying algebra sometimes seems to mean writing in the most condensed form, "using the least possible amount of ink", but of course \frac{\sqrt{3}}{3} uses more ink, and more/larger numbers, than \frac{1}{\sqrt{3}}, since 3>1. We would probably prefer to write -1+x as x-1, and this uses slightly less ink (we save a '+' sign, Note 1), but we would not always do this. If we were writing complex numbers in 'real-part, imaginary-part' form, we might prefer -1+i to i-1, especially if we are combining (adding, say) several complex numbers, and don't want to mix up the real and imaginary parts. Similarly, if solving a set of three simultaneous equations in three unknowns, we might prefer to write something like -x+0y+2z, so as to keep the unknowns aligned and in order, rather than 'simplifying' this to 2z-x. Is x^{-1}+y^{-1}+z^{-1} simpler or less simple than its equivalent form, \frac{x+y+z}{xyz}? I think it depends on the context. There are lots of situations in which we seem to prefer using more ink. And we would certainly rather write an exact number like e^{\pi}-\pi, rather than a very good approximation to this, 20, which is unarguably 'simpler' and certainly uses less ink (Note 2). Conversion of units provides another possible example. If you were calculating 1 \text{ cm} + 1.54 \text{ cm}, to obtain 2.54 \text{ cm}, would you regard it as 'simplifying' to convert this to 1 \text{ inch}? What if you happened to end up with an answer of 7.62 \text{ cm} or 3.81 \text{ cm}? Would you spot that they were 'simple' multiples of an inch, and, if so, would you convert to inches? I suppose it would depend on the context, but I don't think I would do this unless there was a good reason. Ambiguity over 'simplification' continues as the mathematics becomes more complicated. Differentiating \sin^2 x to obtain 2\sin x \cos x, should the student 'simplify' this to \sin 2x? What if they were instead given \frac{1}{2}\sin^2 x to differentiate, and so obtained \sin x \cos x, this time without the factor of 2. Any pressure to go to \frac{1}{2}\sin 2x feels less here. If, instead of using the chain rule on \sin^2 x, they had used trigonometric identities to convert to \frac{1}{2}(1-\cos(2x)), then they would 'instantly' obtain \sin 2x as the derivative. But, otherwise, I would not expect students to switch 2\sin x \cos x into \sin 2x. But am I being inconsistent over identities? If they obtained an answer of \sin^2x+\cos^2x, then I certainly would expect them to simplify this to 1! I think it's pretty difficult to explain what exactly we mean by 'Simplify', and to specify what counts as simplified and what doesn't. When I devise trigonometric identity questions, with the instruction 'Simplify', I try to ensure that there is an equivalent form to the expression that I provide that is uncontroversially by far the shortest and 'simplest'; otherwise, it is hard to say that the question has a right answer. But how do I judge the student who arrives at an equivalent expression to that, if all the statements, including the starting one, are equivalent. Agonising over things like this reminds me of the method Paul Halmos (1985) recounted being taught by one of his students for how to answer any trigonometric identities question: If you're told to prove that some expression A is equal to a different-looking B, you put A at the top left corner of the page, B at the bottom right, and, using correct but trivial substitutions, keep changing them, working from both ends to the middle. When they meet, stop. If the identity you were given is a true one (it always is), everything on the page is true. To be sure, somewhere near the middle of the page there is a gigantic step, probably as big as the original problem, but very few paper graders will ever find it, or, if they find it, dare to mark you down for it - it is, after all, true! (Halmos, 1985, p. 25). I think that the idea that every expression has a unique, 'most simplified' form is not really right - and finding this magic form (and knowing when you've got it) is certainly a hard thing to communicate to students. Perhaps we need to be open about the fact that the simplest, most elegant way to leave an answer is to some extent a matter of judgment. ### Questions to reflect on 1. How do you explain to your students what is required for 'simplified' answers? 2. Can you think of other examples of ambiguous or confusing situations involving simplification? ### Notes 1. I suppose if we wanted to be super-picky about this, we could argue about whether the '-' in '-1' might be written as a smaller line, like '\text{-}', than the '-' in '1-x'. 2. No one knows 'why' e^{\pi} (Gelfond's constant) is so close to \pi + 20. Maybe it doesn't really make sense to ask for 'explanations' of things like this (see https://en.wikipedia.org/wiki/Mathematical_coincidence). ### References Foster, C. (2021). Questions pupils ask: What are 'like terms'? Mathematics in School, 50(4), 20–21. https://www.foster77.co.uk/Foster,%20Mathematics%20in%20School,%20What%20are%20'like%20terms'.pdf Halmos, P. R. (1985). I want to be a mathematician: An automathography. Springer Science & Business Media. ## 01 September 2022 ### Interactive introductions How do you introduce a new mathematical topic or concept? Do you give students a task to do, or do you start by explaining everything? I think most teachers do a mixture of these things, depending on the topic and the class, and sometimes they orchestrate something that is kind of in between - what I call an interactive introduction. This is highly teacher-led, but aims to be more like a conversation and discussion than a monologue. This doesn't mean that it it is a 'free for all', in which anyone can just say anything that occurs to them. Nor is the teacher merely relying on one or two students happening to know what they wish to teach and telling everyone else. Realistically, only a few of the students will get to contribute orally to any particular interactive introduction. But, when an interactive introduction works well, all of the students will be equally able to 'participate' by engaging in the thinking process. They follow the thinking of the discussion, which is carefully planned not to depend on any knowledge which the teacher hasn't yet taught. And the teacher plans the interactive introduction to involve moments of puzzlement and surprise. The students are not left to figure out the content for themselves, but nor are they presented with it on a plate, all tidied up and complete. The teacher leads them to ask and answer the relevant questions. It is easy to write a paragraph like that one, having my cake and eating it, and making it all sound so good. But how about some examples? Over time, many teachers have developed really nice ways to introduce topics, but I am not sure that these typically get shared so much. Teachers often share 'resources', which usually means either worksheets oriented towards the students - tasks for the students to do - or PowerPoint presentations for the teacher, that generally explain content and provide examples and exercises. Neither of these is quite what I'm talking about when I say an interactive introduction. So, I'm going to share a few examples of how I have introduced certain common topics. I'm not making any claims for greatness here, and I'm sharing them as Word files so that you can cut and edit as you wish, if you find anything there that you want to use/develop/improve. I've kept each one to 1 side of paper, but hopefully there's enough here for you to see what I'm trying to do. Certainly, any kind of 'scripted' lesson has to be 'made your own' before you can authentically use it - I wouldn't envisage reading out any of this word for word, but instead attempting to capture the overall idea and adapting it to your own style and purposes. I've chosen the specific mathematical examples used in them quite carefully - certainly much more carefully than I could have done if you'd asked me on the spur of the moment to get up and explain something, unprepared. I think the particular examples might be the most valuable part of these interactive introductions, but please see what you think. I'd be very happy for lots of criticism of them in the Comments below. If you hate them, that's fine! So here are: 1. A first lesson on 'standard form'. (I discussed this one in my most recent podcast with Craig Barton.) (Word and pdf formats) 2. A first lesson on 'enlargement'. (Word and pdf formats and the associated PowerPoint file.) 3. A first lesson on 'circles and \pi'. (Word and pdf formats and the associated PowerPoint file.) And, finally, as a bit of a further experiment, I've also had a go at making a video of me introducing the idea of complex numbers (Word and pdf formats of the sheets). This is the sort of thing I would do with a sixth-form class in which I could assume that the students were familiar with the quadratic formula but have had no formal teaching about i. (You might also wish to see the related article, Foster, 2018.) Of course, in real life it wouldn't be a monologue like this, and would be 'interactive' to some degree. (And apologies for the sound quality on this recording - it turned out that the microphone wasn't plugged in, so it was recording through my laptop, but I didn't want to bother re-recording it!) So, this is a shorter blogpost than usual, in order to give you time to look at the materials I've linked to. Now over to you - comments, criticisms and improvements, please... ### Questions to reflect on 1. What are your thoughts on the idea of 'interactive introductions'? 2. What comments do you have on any of these specific examples? ### Note 1. You can listen to the episode here: http://www.mrbartonmaths.com/blog/research-in-action-16-writing-a-maths-curriculum-with-colin-foster/ ### Reference Foster, C. (2018). Questions pupils ask: Is i irrational? Mathematics in School, 47(1), 31–33. https://www.foster77.co.uk/Foster,%20Mathematics%20in%20School,%20Is%20i%20irrational.pdf ## 18 August 2022 ### The Differentiator I have been very inspired by Leslie Dietiker's way of thinking about mathematics lessons as 'stories' (see Dietiker, 2015). In this post, I'm thinking more about how actual stories might be used within mathematics lessons (see https://www.mathsthroughstories.org/). I don't mean historical anecdotes about famous mathematicians (Gauss summing the positive integers, Galois fighting a duel, etc.). I am thinking of completely fictitious stories that get at some mathematical concept or idea. So, yes, I'm in 'holiday mode', but I'm hoping that this can be more than 'a bit of fun'. I'm going to give a calculus example suitable for ages 16-18, so as to counter the idea that stories are just for little children. But I'm hoping that you might be able to adapt the idea for any topic or age. I think something like this could be quite memorable but you would probably only want to do it occasionally... In function-land, where all the elementary functions live, the polynomials were terrified. The Differentiator was stalking the land, striking fear into the hearts of all well-behaved functions. Poor x^3 had already been attacked, and, now as 3x^2, had the scars to show it. Poor little x was scared out of his mind – unlike x^3, he knew he had only two chances with The Differentiator before he would be reduced to nothing. But, it was really the constants who were most afraid - everyone knew that The Differentiator had had \pi for lunch yesterday and not a crumb remained.  The Differentiator having \pi for lunch Everyone was looking to x^{100} to help, and she was putting on as brave a face as she could. But even she knew that, sooner or later, her time would be up, and there was nothing anyone could do about it. The polynomials’ days were literally numbered. The hopes of the entire community were pinned on their hero, e^x. They knew that e^x could laugh in the face of The Differentiator: “Do your worst!” e^x would say, and then stand back, completely unperturbed, as The Differentiator went into action. It was as though e^x were inoculated against the terrors of The Differentiator. Some of the polynomials, such as x^2, had decided to take refuge by hiding behind e^x, with some success:\frac{d}{dx} \left( e^{x}x^2 \right) =e^x(x^2+2x).$$or by climbing up onto e for protection:$$\frac{d}{dx} \left( e^{x^2} \right)=2xe^{x^2}.$$But then, one fateful day, as The Differentiator was out prowling around, The Differentiator finally met their match, in the shape of e^{2x}. Unaware of what they were facing, The Differentiator attacked:$$\frac{d}{dx} \left(e^{2x} \right) = 2e^{2x}.$$Unbelievably, e^{2x} immediately grew to twice the size! The Differentiator hit again:$$\frac{d}{dx} \left(2e^{2x} \right) = 4e^{2x}.$$And again, and again. But, the more times e^{2x} was attacked, the stronger it became. Sixteen times its original height, 16e^{2x} stared down at The Differentiator, who – now defeated – turned on their heels and fled, and was never seen in function-land again. *** Stories like this don't need to be lengthy - this one's a bit too long, I think. You could challenge students to make up their own - maybe a sequel, in which The Integrator comes to the rescue? I have used this kind of story to lead in to thinking about 'differentiation-proof' functions, like e^x. At A-level, students meet the first-order differential equation:$$\frac{dy}{dx}=y$$and, with it, the idea of a differentiation-proof function. “I’m thinking of a function, and when I differentiate it I get exactly the same function back. What might my function be?” Starting with this prompt, students may suggest the zero function, y=0, and this is a trivial case of the general solution. They might think that y=e^x is the only possibility for a general solution, but, of course, we need an arbitrary constant, and any constant multiple of this will also work, so the general solution is y=Ae^x, where A is any constant, and the A = 0 case gives the zero function. The general solution can be derived by separating the variables:$$\frac{dy}{dx}=y\int \frac{1}{y}\frac{dy}{dx}dx=\int 1dx \ln \lvert y \rvert=x+cy=e^{x+c}=Ae^x,$$where c and A are constants. We can differentiate y=Ae^x as many times as we like, and it never changes, so it might seem that this is ‘the’ solution to the general equation \frac{d^n y}{dx^n}=y, where n is any positive integer. But, in fact it is only a solution, not the solution, because an nth-order differentiatial equation ought to have a general solution containing n arbitrary constants, and y=Ae^x contains only one arbitrary constant. Students of Further Mathematics may come across the second-order differential equation \frac{d^2 y}{dx^2}=y, which has general solution y=Ae^x+Be^{-x}, with two arbitrary constants, A and B, this time. So, here is the general solution to finding a function which, when differentiated twice, returns to the original function. And note that this is not necessarily (unless B= 0) identical to the original function after just one differentiation. It is natural for students to wonder about how this pattern might continue for the third-order differential equation \frac{d^3 y}{dx^3}=y. It is clear that y=Ae^x will be one part of this, since we have seen that this satisfies any differential equation of the form \frac{d^n y}{dx^n}=y, where n is a positive integer, since Ae^x is differentiation-proof. But, now that we have a third-order differential equation, we should be expecting two more arbitrary constants, and how can we find them? The term Be^{-x} term has the wrong parity, since differentiating this three times gives -Be^{-x}, rather than Be^{-x}, and it seems like we have hit a brick wall. However, since terms involving e^{kx} have served us very well so far, it may seem natural to use y=e^{kx} as a trial solution in \frac{d^n y}{dx^n}=y. This gives us$$k^n e^{kx}=e^{kx}$$Since e^{kx} is never zero, we require that k^n=1, so the ks that we need are the nth roots of unity. When n = 1, k = 1, and we have y=Ae^x, as we found. When n = 2, k = \pm 1, and we have y=Ae^x+Be^{-x}, as we also found. Now that n = 3, we still have k = 1, but we also have two complex roots, k = -\frac{1}{2} \pm \frac{\sqrt{3}}{2}i, so our general solution should be$$y=Ae^x+Be^{\left( -\frac{1}{2} + \frac{\sqrt{3}}{2}i \right) x} + Ce^{\left( -\frac{1}{2} - \frac{\sqrt{3}}{2}i \right) x},$$which we can write as$$y=Ae^x+B'e^{-\frac{x}{2}}\cos \left( \frac{\sqrt{3}x}{2} \right) + C'e^{-\frac{x}{2}}\sin \left( \frac{\sqrt{3}x}{2} \right),$$or even, if we wish, as$$y=Ae^x+B'\exp{\left( e^{ \frac{2 \pi i}{3} } x \right)}+C'\exp{\left( e^{- \frac{2 \pi i}{3} } x \right)}.$$The n=4 case is much neater:$$y=Ae^x+B''e^{-x}+C''e^{ix}+D''e^{-ix}$$And we have explored the general terrain of 'differentiation-proof' functions! ### Question to reflect on 1. What stories might you use in mathematics lessons to stimulate some worthwhile mathematical thinking? ### Reference Dietiker, L. (2015). Mathematical story: A metaphor for mathematics curriculum. Educational Studies in Mathematics, 90(3), 285-302. https://doi.org/10.1007/s10649-015-9627-x ## 04 August 2022 ### Misremembering Goldbach’s Conjecture It's the holiday, so a shorter, lighter blogpost today, and only one reflection question. I hope you are having a good break! When I went on Craig Barton’s podcast for the first time (Note 1), he asked me (as he asks all his guests) to recount a ‘favourite failure’ - a situation where things didn't go to plan. I had so many to choose from that I had plenty of ideas leftover after the episode, so I thought I’d relate another one here… This is about the time when I misremembered Goldbach’s Conjecture, which states: Every even integer greater than 2 is the sum of two primes. Unfortunately, for some reason, I misremembered it as: Every integer greater than 2 is the sum of two primes. If I had taken a moment to reflect on this, I would have realised that this obviously couldn’t be right, but it was one of those situations where I was distracted or ill or something (I can’t remember the specifics of my excuses!). And so I noticed nothing and carried on... I wanted my Year 8 class (age 12-13) to work on something a bit exploratory and to understand the notion of a ‘counterexample’ – and also get in a bit of incidental practice on recognising prime numbers, which we had just been working on. So, this seemed like a good way to address all of that. So, I told the class that Goldbach’s Conjecture was one of the best-known unsolved problems in all of mathematics, and I explained what a counterexample was. No one knows how to prove that Goldbach’s Conjecture is true, but, if it is false, all it needs is one counterexample to demonstrate that. A single counterexample can do a great deal of work! The students seemed interested in this: “Would we be famous if we found a counterexample?” “Sure!” There was immediately a bit of confusion about the number 3, which should have alerted me to the fact that something was wrong. Some pupils had written 3 = 1 + 2, but others were – correctly – saying that 1 is not a prime number, in which case 3 would be a counterexample. I knew that 1 did used to be considered as a prime number (see Foster, 2016), so I thought perhaps this was just a historical glitch, so I decided that we would say “every integer greater than 3”, rather than 2, to avoid that problem. And so the students began work. Of course, I knew very well that they would not find a counterexample, since all numbers at least as far as 4 \times 10^{18} have been checked (Note 1). If ever a teacher knew ‘the right answer’, I knew that the right answer here was that there would be no counterexample today! The students began work on their own or in pairs, writing (at least, those working more systematically!) things like this: 4 = 2 + 2 5 = 2 + 3 6 = 3 + 3 7 = 2 + 5 8 = 3 + 5 9 = 2 + 7 10 = 5 + 5 11 = … I walked around casually observing what was going on, my mind drifting a little, perhaps. I engaged in some discussion with students about who Goldbach was, why prime numbers matter, and so on, in quite a relaxed way. This was basically routine practice with primes in a more interesting context (a kind of mathematical etude, see Foster, 2018). I gradually became aware that I could hear the number 11 being muttered quite a bit. Then a few people started to say that they had found a counterexample, and it was 11. I decided that this would be a good opportunity to stop everyone and highlight the importance of ‘being systematic’. There's 'being systematic' in the sense of choosing your numbers according to some pattern, rather than haphazardly, but there's also 'being systematic' when you check each number. It’s easy to think you have found a number which can’t be made by summing two primes, and it may just be because you haven’t thoroughly checked all the possibilities. You haven’t managed to find a pair of primes that sum to 11, but that doesn’t mean that there isn’t one. The only way to be sure is to be systematic and check all the possibilities in such a way that you can be sure that you haven’t missed any. “Go back and check – be systematic – make sure you haven’t missed a possibility!” All good advice, to be sure. I vividly remember the moment that one student came to the board and said, essentially: Look, the only possibilities for 11 are: 1 and 10, but neither is prime 2 and 9, but 9 isn’t prime 3 and 8, but 8 isn’t prime 4 and 7, but 4 isn’t prime 5 and 6, but 6 isn’t prime So, 11 is a counterexample. Ordinarily, I would have been very pleased with such a proof by exhaustion. But, I remember staring at the board thinking, “What am I missing?” Even if we included 1 as prime, it would have to go with 10, which had certainly never been prime in anyone’s book! As I tried to figure out what was going on, the class became more excited at my puzzlement: “We’ve done it! We’ve solved this big maths problem – and it wasn’t even that hard!”, “Are we going to be on the news, sir?”, “Maybe no one ever bothered to check 11 because they assumed someone else had already checked it? Sometimes it’s the easy things that get missed!”, etc. Obviously, if there were a counterexample, it was going to be considerably higher than 11. So, feeling desperate, I now Googled “Goldbach’s Conjecture”: “Every even integer greater than 2 is the sum of two primes.” ‘Even, even, even!’ (Having computers connected to the internet in every classroom has to be one of the great pedagogical advances of recent decades.) Of course, with hindsight it is very clear that the only way to make an odd number by summing two integers is if one of the integers is odd and the other one is even. And the only even prime is 2. So, the only way my version of Goldbach’s Conjecture could be true is if every odd number were 2 greater than a prime. This is equivalent to saying that every odd number is prime, and although it is true that (almost, with the exception of 2), every prime number is odd, the reverse is not the case. This is why we had the problem with 3, because 1, which is 3-2, is not prime. But then 5, 7 and 9 all have primes 2 less than them, so everything seems fine for a while, but then 11 doesn’t, because 9 is not prime, and that’s why it had appeared to be a counterexample. So, at least there was something mildly interesting to understand in relation to my mistake. Obviously, a counterexample to one conjecture is not necessarily a counterexample to a different conjecture. There was understandably limited enthusiasm now for going back and checking for counterexamples to the real Goldbach Conjecture. It felt like the moment had passed, and perhaps the objectives of understanding what a counterexample is and gaining facility with primes had been accomplished more or less anyway. I reflected afterwards on the strange feeling of seeing the student's apparently flawless proof and yet not believing it – the feeling that ‘there must be something wrong even though I can’t see what it is’. However rational we might aspire to be about mathematics, we are influenced by more than merely logical arguments. I was quite sure that the students must have made a mistake and omitted a possibility, and I was reluctant to believe even the very simple mathematics of their proof until I had appreciated the wrong assumption that I had begun the whole lesson with. ### Question to reflect on 1. Do you have any 'armchair responses' (AssocTeachersMaths, 2020; Foster, 2019) to my ‘favourite failure’ or to any of your own? ### Notes 1. You can listen to the episode here: http://www.mrbartonmaths.com/blog/colin-foster-mathematical-etudes-confidence-and-questioning/ ### References AssocTeachersMaths. (2020, July 13). Armchair Responses to Classroom Events - with Colin Foster [Video]. YouTube. https://youtu.be/L0ovhillL0c Foster, C. (2016). Questions pupils ask: Why isn’t 1 a prime number? Mathematics in School, 45(3), 12–13. https://www.foster77.co.uk/Foster,%20Mathematics%20in%20School,%20Why%20isn't%201%20a%20prime%20number.pdf Foster, C. (2018). Developing mathematical fluency: Comparing exercises and rich tasks. Educational Studies in Mathematics, 97(2), 121–141. https://doi.org/10.1007/s10649-017-9788-x Foster, C. (2019). Armchair responses. Mathematics in School, 48(3), 26–27. https://www.foster77.co.uk/Foster,%20Mathematics%20in%20School,%20Armchair%20responses.pdf ## 21 July 2022 ### Making rounding interesting Are there any 'boring' topics in mathematics? Understandably, mathematics teachers tend to be kind of professionally committed to the idea that all mathematics topics are interesting. If even the teacher doesn’t find the topic interesting, then what hope is there for the students? And yet, perhaps, if we are completely honest about it, we find some topics a bit harder to be enthusiastic about. For me, ‘rounding’ is that kind of a topic. But can it be made interesting? I wonder if rounding is any mathematics teacher’s favourite topic? Somehow I doubt it, although perhaps, following this post, lots of people will write in the comments that it is theirs, which would be interesting! Even if it perhaps isn’t the most exciting topic, it’s certainly one that contributes to success in high-stakes assessments. Students will be repeatedly penalised throughout their examination paper if they don’t correctly round their answers to the specified degree of accuracy, so it’s certainly something that needs teaching. Boring but important? When I suggest that rounding is not a very intrinsically interesting topic, I am not talking about ‘estimation’. That is certainly something that can be extremely interesting and engaging. I really like beginning with some scenario, such as a jar of sweets, and asking students for their off-the-top-of-their-head guesstimates of how many there are, and then coming up with a variety of different ways to improve on this (Note 1). Ideally this leads to the notion that quicker, rougher estimates are not necessarily ‘worse’ than more accurate ones, and choosing the optimal level of accuracy depends on the purpose for which you need the estimate and how much time you have available and how much effort seems worthwhile. Level of accuracy needs to be fit for purpose. A good way to promote this is to ask questions like: • Which weighs more - a cat or 10,000 paperclips? • Which mathematics teacher in our school do you think is closest to being a billion seconds old? [Apologies, but I don't know where I first came across these examples - please say in the comments if there is someone I should acknowledge for these.] In these, it is clear that your estimates only need to be accurate enough to answer the question. There is no point obtaining more accuracy than you need to do that. But here I’m not thinking about contextual estimates like that but the more abstract kind of questions that you see in textbooks and on examinations, like: Estimate the answer to 0.278 \times 73.4-\sqrt{48.3}. These questions that ask for ‘an estimate’ but don’t specify how accurate it should be are a bit nonsensical, it seems to me. You could always answer any question like this with ‘zero’, and the only hard part would be working out what degree of accuracy this was to (which the question never asks for). For example, the answer to this calculation turns out to be 13, to the nearest integer, so this would be 0 to the nearest 100, 0 to the nearest 1000, or (to be on the safe side) 0 to the nearest billion! Any point on the number line is always ‘close’ to zero if you zoom out far enough. So, you will technically never go wrong with a question like this by answering ‘0 to the nearest trillion’ – although of course mark schemes would not reward you for that! More seriously, the usual approach that is taught within school mathematics is to round each individual number to 1 significant figure, with the possible exception of when you are about to find a root, where you might fiddle it to the nearest convenient number instead. So, in this example, although 48.3 would round to 50 to 1 significant figure, or 48 to 2 significant figures, we might instead choose to round it to 49, because \sqrt{49}=7. Doing that, we would get something we should be able to do easily in our head: 0.3×70-\sqrt{49}=21-7=14. The issue of how good our estimate might be (and therefore what it might be good for) is not really addressed at this level, and students would be expected simply to leave their answer as 14, without any idea how close this is likely to be to the true answer, or even whether it is an underestimate or an overestimate. But is this 14±1 or 14±1000 or what? This is really a bit strange, as, in any real situation, a lot of the value in estimating is in getting bounds. We may not care exactly what the answer is, but it is usually important to know that it is definitely between some number and some other number. Simply throwing back an answer like ‘14’, which we know is almost certainly not exactly right, without having any idea how wrong it is, doesn’t seem very useful. Usually, we are estimating a number in order to enable us to make some real-life decision – how much paint to buy, or how many coaches to order – and those all require us to commit to some actual quantity. So, really, I don’t want to know ‘roughly 14’ – I want to know ‘definitely between 10 and 20’ or definitely between 10 and 15. So perhaps we should teach it this way? (Note 2) Then, we can consider that how much effort it is worth going to in order to get a more accurate estimate depends on how narrow I want my bounds to be. It’s foolish to act as though more accuracy is simply an absolute good. (Sitting down and calculating more and more digits of \pi forever would not serve any useful purpose.) Sometimes, when peer marking, students will be told to give themselves more marks if their answer is closer to the ‘true’ answer, but I think this reinforces an unhelpful view of estimation. It also encourages students to 'cheat', by first calculating the exact answer, rounding this answer, and then constructing some fake argument for how they legitimately got it. If more accuracy were always better, we would always use a calculator or computer and get the answer to as high a degree of accuracy as we possibly could. But, with estimation, the sensible thing to do is to spend your effort according to how useful any extra accuracy would be in the particular context that applies. These seem to me the important issues in estimation, and they go largely unaddressed in the lessons on estimation that I see. #### Exploring rounding One way to make the topic of ‘rounding’ a bit more interesting is to begin to explore some of these issues. For example, in the calculation above, since (almost) all of the numbers were rounded to 1 significant figure, it might seem sensible to give the answer to 1 significant figure, which would be 10, suggesting that this means 10±5. In this case, the exact answer to the original calculation (13.45537…) is also 10, to 1 significant figure, which is good, and there seems to be an assumption within school mathematics that almost has the status of a theorem: Claim 1: If you round each number in a calculation to 1 significant figure, then the answer will also be correct to 1 significant figure. However, there is no reason at all why this should be true, and you might like to consider what the simplest counterexample is that you can find. When can you be more confident using this heuristic, and when should you be more cautious? *** A simple counterexample would be 3.5+3.5, which comes to 8 if you round each of the 3.5s to 4 (to 1 significant figure) before you add them, but 8 is not the correct answer to 1 significant figure, because of course it should be 7. A slightly more complicated scenario that might be worth exploring with students involves rounding two numbers in a subtraction, so we could begin with a question like this: Estimate the answer to 14.2-12.9. (You might ask, "Why estimate something so simple, and not just calculate?", and the point of this is not to be a realistic rounding scenario, but a simplified situation to help us see what is actually going on with rounding.) So, here's another claim: Claim 2: If we round each number to the nearest integer, then the answer will be correct to the nearest integer. Is this claim always, sometimes or never true? Students will need a bit of time to figure out what the claim even means. Using the notation [x] to mean “round x to the nearest integer”, we could write: [14.2]-[12.9] = 14-13 = 1 And [14.2-12.9] = [1.3] = 1. So that checks out in this case. So, in this notation, the question is: When is [a-b] = [a]-[b]? I think this is a potentially interesting task, where there is plenty to think about, but it also generates some repetitive but somehow acceptable routine practice. (I call such tasks mathematical etudes – see Foster, 2018). You might like to try it yourself before reading on. *** Running through this for all possibilities of 14.x-12.y, where x and y are single digits between 1 and 9, we find this situation:  Table 1. [14.x-12.y] and [14.x]-[12.y] compared, where x and y are single digits between 1 and 9.Ticks indicate where equality holds. So, a counterexample to Claim 2 would be any of the empty cells in this table; for example, [14.7-12.3] = [2.4] = 2 but [14.7]-[12.3] = 15-12 = 3. We might prefer to write this on one line as:$$3 = 15-12 = [14.7]-[12.3] ≠ [14.7-2.3] = [2.4] = 2$$Applying some deduction, we might say: 1. If both numbers in the subtraction are rounded up, or both are rounded down, we should get a tick. These are the ticks in the green squares in the table above. We might also be tempted to say: 2. If one number is rounded up and the other number is rounded down, we should not get a tick. As you can see from Table 1, this is false, as can be seen by the ticks in some of the white squares. Why does this happen? For example, in 14.3-12.8, the minuend rounds down and the subtrahend rounds up, and we get no tick, since the difference, 1.5, rounds up to 2, whereas 14-13 = 1. However, this doesn’t always happen. For example, in 14.2-12.8, as before, the minuend rounds down and the subtrahend rounds up, giving 14-13 = 1, but this time the difference is only 1.4, which rounds down to 1, so we do get a tick. There is lots to explore here, and the idea of comparing the result from applying some function before and after some composition - i.e., f(x \pm y) \stackrel{?}{=} f(x) \pm f(y) - is a highly mathematical question. When I look back at mathematics tasks that I have designed over the years, I now notice that they often cluster around certain ‘favourite’ topics. Without meaning to, I have unintentionally avoided certain topics – perhaps those that, like ‘rounding’, seem intrinsically less interesting – and cherrypicked other topics to design tasks for. At Loughborough, we are currently working on designing a complete set of teaching materials for Year 7-9, so we are now working in the same kind of situation as teachers – we can’t miss anything out! And this has led me to thinking about how to address some of those potentially ‘less interesting’ topics, which is proving fun. ### Questions to reflect on 1. Are there mathematics topics that you personally find less interesting to teach? Which ones? Why? 2. What tasks can make these topics more interesting for you and for your learners? 3. For rounding, what other tasks can you devise? Is [a+b] \stackrel{?}{=} [a]+[b] an easier or harder problem? What about [ab] \stackrel{?}{=} [a][b]? ### Notes 1. Dan Meyer is the expert at designing tasks like this; e.g., https://blog.mrmeyer.com/2009/what-i-would-do-with-this-pocket-change/; https://blog.mrmeyer.com/2008/linear-fun-2-stacking-cups/; https://www.101qs.com/70-water-tank-filling 2. I think the various versions of the “approximately-equal sign” ≈ are not really our friends here, because a statement like 13≈10 doesn’t really have a precise meaning. ### References Eastaway, R. (2021). Maths on the back of an envelope: Clever ways to (roughly) calculate anything. HarperCollins. Weinstein, L., & Adam, J. A. (2009). Guesstimation. Princeton University Press. Weinstein, L. (2012). Guesstimation 2.0. Princeton University Press. ## 07 July 2022 ### A football on the roof I am always on the lookout for 'real-life' mathematics that is of potential relevance and interest to students but where the mathematics isn't trivial and the context isn't contrived. Too often the scenario is of potential interest but the mathematics is spurious, and doesn't really offer anything in the actual situation that couldn't be done more easily without mathematics. It is not easy to find good examples, but I think this is one that might provide some opportunities to work on topics such as similar triangles and ratio. Some students lost a football on a flat roof and wanted to know whether the ball had rolled off and fallen down behind the back of the building (i.e., gone forever) or whether it was worth climbing up to retrieve it (Note 1). There weren't any tall buildings nearby that they could access to get a good view of the roof. What they needed to know was how far back from the building they needed to stand so as to be sure that if the ball was there they would be able to see it. "Can you see it?" "No, but I just need to go back a bit further." "If it was there, you'd be able to see it by now." "I'm not sure." In particular, going as far back from the building as possible, given the constraints of the surrounding buildings, did the fact that they couldn't see the football mean that it was definitely not there, or could it be that it was just not visible over the edge of the building (Figure 1)?  Figure 1. A football on the roof This problem is reminiscent of lessons in which students determine the height of a tree near the school using a clinometer, but it feels somehow different. There is not usually any good reason for wanting to know the height of a tree, and it is usually hard to find any way to decide afterwards whether the students' estimates are reasonably accurate or not. In this case, there is a clear 'need to know' and, ultimately, when the site manager brings a ladder, the students would discover if they were right or wrong, so it feels as though something is at stake. A good way to start would be to decide on simplifying assumptions that it seems sensible to make; i.e., things that we might sensibly choose to ignore. For example: • assume that the ground and all roofs are perfectly horizontal • assume that the roof in question is free from any debris • assume that the building has height 4 m and goes back 6 m • assume that the football is perfectly spherical, with diameter 22 cm • assume (worst-case scenario) that the ball is right at the back of the roof, against the brick wall Students may suggest more outlandish things, such as assuming that light travels in straight lines or that the curvature of the earth is negligible, and I would include these as well if they raised them.  Figure 2. Careful analysis (diagram not drawn to scale) Let's start with a careful analysis, which uses trigonometry and is 'a sledgehammer to crack a nut' for this simple scenario. This is not the approach that I would envisage students taking. Lots of the work has been done in the diagram (Figure 2), and our units are metre throughout. We have$$\tan \theta = \frac{r}{l}\tan 2\theta = \frac{h}{d}$$Using the identity$$\tan 2\theta \equiv \frac{2 \tan \theta}{1-\tan^2 \theta}$$we obtain$$\frac{h}{d}= \frac{2 \left( \frac{r}{l} \right) }{1- \left( \frac{r}{l} \right)^2},$$giving$$d= \frac{h(l^2-r^2)}{2rl}.$$We can now substitute in some reasonable values: • h=4-1.8=2.2; the height of the building subtract the maximum eye height of the student when standing on tip toes or jumping, • l=6-0.22=5.78; the depth of the shed subtract the diameter of the football, and • r=0.11. This gives d=57.8, so the student would just be able to see the top of the football from about 58 metre back from the shed. But the trigonometry here is overkill for the nature of this problem and the accuracy required, so it would be much quicker and more reasonable to use the simplified diagram shown in Figure 3.  Figure 3. Rougher analysis (diagram not drawn to scale) For this rougher analysis, we don't need to use \tan explicitly and can just equate corresponding ratios in similar triangles. So,$$\frac{d}{h}=\frac{l}{2r},$$giving that$$d=\frac{hl}{2r},$$so, with the same values as above, this again gives d=57.8, correct to 1 decimal place, and the same conclusion that the student would just be able to see the top of the football from about 58 metre back from the shed. In the situation where l \gg r, we can see that in our first equation$$d= \frac{h(l^2-r^2)}{2rl}$$the bracket (l^2-r^2) will, to a good approximation, reduce to l^2, giving$$d \approx \frac{hl^2}{2rl}=\frac{hl}{2r},$$as before. So, all routes lead to an answer of about 58 metre. But, what if the playground extends only, say, 40 metre before meeting another building? Would it be worth the students going inside and fetching a chair to stand on? Would that make enough difference to be worth the trouble? The beauty of having derived a formula is that a question like this can be answered instantly by substitution. All that changes here is that h reduces from 2.2 to, say, 1.7. So,$$d=\frac{hl}{2r}=\frac{1.7 \times 5.78}{2 \times 0.11}=44.7,$$and so this would not quite be enough to work within the available space, since 44.7 > 40. Rearranging the equation to give$$h=\frac{2rd}{l}$reveals that, unless you can find a stool of height at least$2.2 -1.52 = 0.68\$ metre, then there is no point bothering.

The mathematics here is not profound, but the result is not guessable without it. I think we need more tasks like this, where a little bit of mathematics (not pages and pages) tells you something practically useful that you couldn't have guesstimated accurately enough without it.

### Questions to reflect on

1. Would your students find a task like this credibly realistic and engaging? How might you improve it?

2. What 'real-life' tasks do you use that are both non-trivial mathematically and non-embarrassing in terms of correspondence with reality?

### Note

1. Disclaimer: Nothing in this post should be taken to endorse climbing onto roofs to retrieve footballs!

### Teaching specific tactics for problem solving

This is my final blogpost, as my year as President of the Mathematical Association draws to a close, so I've allowed myself to go on at ...